#include "CCB_HD_COMM.h"

void HD_COMM_Init(uint32_t GW485_BaudRate, uint32_t BAT485_BaudRate)
{
    MX_UART4_Init();

    /* GW485初始化 */
    huart2.Instance = USART2;
    huart2.Init.BaudRate = GW485_BaudRate;
    huart2.Init.WordLength = UART_WORDLENGTH_8B;
    huart2.Init.StopBits = UART_STOPBITS_1;
    huart2.Init.Parity = UART_PARITY_NONE;
    huart2.Init.Mode = UART_MODE_TX_RX;
    huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
    huart2.Init.OverSampling = UART_OVERSAMPLING_16;
    huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
    huart2.Init.ClockPrescaler = UART_PRESCALER_DIV1;
    huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
    if (HAL_RS485Ex_Init(&huart2, UART_DE_POLARITY_HIGH, 0, 0) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_SetTxFifoThreshold(&huart2, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_SetRxFifoThreshold(&huart2, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_DisableFifoMode(&huart2) != HAL_OK)
    {
        Error_Handler();
    }

    /* BAT485初始化 */
    huart3.Instance = USART3;
    huart3.Init.BaudRate = BAT485_BaudRate;
    huart3.Init.WordLength = UART_WORDLENGTH_8B;
    huart3.Init.StopBits = UART_STOPBITS_1;
    huart3.Init.Parity = UART_PARITY_NONE;
    huart3.Init.Mode = UART_MODE_TX_RX;
    huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
    huart3.Init.OverSampling = UART_OVERSAMPLING_16;
    huart3.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
    huart3.Init.ClockPrescaler = UART_PRESCALER_DIV1;
    huart3.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
    if (HAL_RS485Ex_Init(&huart3, UART_DE_POLARITY_HIGH, 0, 0) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_SetTxFifoThreshold(&huart3, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_SetRxFifoThreshold(&huart3, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
    {
        Error_Handler();
    }
    if (HAL_UARTEx_DisableFifoMode(&huart3) != HAL_OK)
    {
        Error_Handler();
    }
}