gateway/Peripheral/src/ch32v30x_dac.c

/********************************** (C) COPYRIGHT  *******************************
* File Name          : ch32v30x_dac.c
* Author             : WCH
* Version            : V1.0.0
* Date               : 2021/06/06
* Description        : This file provides all the DAC firmware functions.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for 
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v30x_dac.h"
#include "ch32v30x_rcc.h"

/* CTLR register Mask */
#define CTLR_CLEAR_MASK    ((uint32_t)0x00000FFE)

/* DAC Dual Channels SWTR masks */
#define DUAL_SWTR_SET      ((uint32_t)0x00000003)
#define DUAL_SWTR_RESET    ((uint32_t)0xFFFFFFFC)

/* DHR registers offsets */
#define DHR12R1_OFFSET     ((uint32_t)0x00000008)
#define DHR12R2_OFFSET     ((uint32_t)0x00000014)
#define DHR12RD_OFFSET     ((uint32_t)0x00000020)

/* DOR register offset */
#define DOR_OFFSET         ((uint32_t)0x0000002C)

/*********************************************************************
 * @fn      DAC_DeInit
 *
 * @brief   Deinitializes the DAC peripheral registers to their default reset values.
 *
 * @return  none
 */
void DAC_DeInit(void)
{
    RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE);
    RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE);
}

/*********************************************************************
 * @fn      DAC_Init
 *
 * @brief   Initializes the DAC peripheral according to the specified parameters in
 *        the DAC_InitStruct.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *          DAC_InitStruct - pointer to a DAC_InitTypeDef structure.
 *
 * @return  none
 */
void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef *DAC_InitStruct)
{
    uint32_t tmpreg1 = 0, tmpreg2 = 0;

    tmpreg1 = DAC->CTLR;
    tmpreg1 &= ~(CTLR_CLEAR_MASK << DAC_Channel);
    tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration |
               DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer);
    tmpreg1 |= tmpreg2 << DAC_Channel;
    DAC->CTLR = tmpreg1;
}

/*********************************************************************
 * @fn      DAC_StructInit
 *
 * @brief   Fills each DAC_InitStruct member with its default value.
 *
 * @param   DAC_InitStruct - pointer to a DAC_InitTypeDef structure which will be initialized.
 *
 * @return  none
 */
void DAC_StructInit(DAC_InitTypeDef *DAC_InitStruct)
{
    DAC_InitStruct->DAC_Trigger = DAC_Trigger_None;
    DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None;
    DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0;
    DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable;
}

/*********************************************************************
 * @fn      DAC_Cmd
 *
 * @brief   Enables or disables the specified DAC channel.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *          NewState - new state of the DAC channel(ENABLE or DISABLE).
 *
 * @return  none
 */
void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState)
{
    if(NewState != DISABLE)
    {
        DAC->CTLR |= (DAC_EN1 << DAC_Channel);
    }
    else
    {
        DAC->CTLR &= ~(DAC_EN1 << DAC_Channel);
    }
}

/*********************************************************************
 * @fn      DAC_DMACmd
 *
 * @brief   Enables or disables the specified DAC channel DMA request.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *          NewState - new state of the DAC channel(ENABLE or DISABLE).
 *
 * @return  none
 */
void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState)
{
    if(NewState != DISABLE)
    {
        DAC->CTLR |= (DAC_DMAEN1 << DAC_Channel);
    }
    else
    {
        DAC->CTLR &= ~(DAC_DMAEN1 << DAC_Channel);
    }
}

/*********************************************************************
 * @fn      DAC_SoftwareTriggerCmd
 *
 * @brief   Enables or disables the selected DAC channel software trigger.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *          NewState - new state of the DAC channel(ENABLE or DISABLE).
 *
 * @return  none
 */
void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState)
{
    if(NewState != DISABLE)
    {
        DAC->SWTR |= (uint32_t)DAC_SWTRIG1 << (DAC_Channel >> 4);
    }
    else
    {
        DAC->SWTR &= ~((uint32_t)DAC_SWTRIG1 << (DAC_Channel >> 4));
    }
}

/*********************************************************************
 * @fn      DAC_DualSoftwareTriggerCmd
 *
 * @brief   Enables or disables the two DAC channel software trigger.
 *
 * @param   NewState - new state of the DAC channel(ENABLE or DISABLE).
 *
 * @return  none
 */
void DAC_DualSoftwareTriggerCmd(FunctionalState NewState)
{
    if(NewState != DISABLE)
    {
        DAC->SWTR |= DUAL_SWTR_SET;
    }
    else
    {
        DAC->SWTR &= DUAL_SWTR_RESET;
    }
}

/*********************************************************************
 * @fn      DAC_WaveGenerationCmd
 *
 * @brief   Enables or disables the selected DAC channel wave generation.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *          DAC_Wave - Specifies the wave type to enable or disable.
 *            DAC_Wave_Noise - noise wave generation
 *            DAC_Wave_Triangle - triangle wave generation
 *          NewState - new state of the DAC channel(ENABLE or DISABLE).
 *
 * @return  none
 */
void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState)
{
    if(NewState != DISABLE)
    {
        DAC->CTLR |= DAC_Wave << DAC_Channel;
    }
    else
    {
        DAC->CTLR &= ~(DAC_Wave << DAC_Channel);
    }
}

/*********************************************************************
 * @fn      DAC_SetChannel1Data
 *
 * @brief   Set the specified data holding register value for DAC channel1.
 *
 * @param   DAC_Align - Specifies the data alignment for DAC channel1.
 *            DAC_Align_8b_R - 8bit right data alignment selected
 *            DAC_Align_12b_L - 12bit left data alignment selected
 *            DAC_Align_12b_R - 12bit right data alignment selected
 *          Data - Data to be loaded in the selected data holding register.
 *
 * @return  none
 */
void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data)
{
    __IO uint32_t tmp = 0;

    tmp = (uint32_t)DAC_BASE;
    tmp += DHR12R1_OFFSET + DAC_Align;

    *(__IO uint32_t *)tmp = Data;
}

/*********************************************************************
 * @fn      DAC_SetChannel2Data
 *
 * @brief   Set the specified data holding register value for DAC channel2.
 *
 * @param   DAC_Align - Specifies the data alignment for DAC channel1.
 *            DAC_Align_8b_R - 8bit right data alignment selected
 *            DAC_Align_12b_L - 12bit left data alignment selected
 *            DAC_Align_12b_R - 12bit right data alignment selected
 *            Data - Data to be loaded in the selected data holding register.
 *
 * @return  none
 */
void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data)
{
    __IO uint32_t tmp = 0;

    tmp = (uint32_t)DAC_BASE;
    tmp += DHR12R2_OFFSET + DAC_Align;

    *(__IO uint32_t *)tmp = Data;
}

/*********************************************************************
 * @fn      DAC_SetDualChannelData
 *
 * @brief   Set the specified data holding register value for two DAC.
 *
 * @param   DAC_Align - Specifies the data alignment for DAC channel1.
 *            DAC_Align_8b_R - 8bit right data alignment selected
 *            DAC_Align_12b_L - 12bit left data alignment selected
 *            DAC_Align_12b_R - 12bit right data alignment selected
 *            Data - Data to be loaded in the selected data holding register.
 *          Data1 - Data for DAC Channel1.
 *          Data2 - Data for DAC Channel2
 *
 * @return  none
 */
void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1)
{
    uint32_t data = 0, tmp = 0;

    if(DAC_Align == DAC_Align_8b_R)
    {
        data = ((uint32_t)Data2 << 8) | Data1;
    }
    else
    {
        data = ((uint32_t)Data2 << 16) | Data1;
    }

    tmp = (uint32_t)DAC_BASE;
    tmp += DHR12RD_OFFSET + DAC_Align;

    *(__IO uint32_t *)tmp = data;
}

/*********************************************************************
 * @fn      DAC_GetDataOutputValue
 *
 * @brief   Returns the last data output value of the selected DAC channel.
 *
 * @param   DAC_Channel - the selected DAC channel.
 *            DAC_Channel_1 - DAC Channel1 selected
 *            DAC_Channel_2 - DAC Channel2 selected
 *
 * @return  none
 */
uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel)
{
    __IO uint32_t tmp = 0;

    tmp = (uint32_t)DAC_BASE;
    tmp += DOR_OFFSET + ((uint32_t)DAC_Channel >> 2);

    return (uint16_t)(*(__IO uint32_t *)tmp);
}