pengsx
/
gateway_mcu
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
gateway_mcu/CH32V303-FreeRTOS/Peripheral/src/ch32v30x_flash.c

1224 lines
33 KiB
C
Raw Normal View History

创建工程
2025-02-21 10:07:21 +00:00
/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v30x_flash.c
* Author : WCH
* Version : V1.0.0
* Date : 2024/05/24
* Description : This file provides all the FLASH firmware functions.
*********************************************************************************
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* Attention: This software (modified or not) and binary are used for
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
*******************************************************************************/
#include "ch32v30x_flash.h"
/* Flash Control Register bits */
#define CR_PG_Set ((uint32_t)0x00000001)
#define CR_PG_Reset ((uint32_t)0xFFFFFFFE)
#define CR_PER_Set ((uint32_t)0x00000002)
#define CR_PER_Reset ((uint32_t)0xFFFFFFFD)
#define CR_MER_Set ((uint32_t)0x00000004)
#define CR_MER_Reset ((uint32_t)0xFFFFFFFB)
#define CR_OPTPG_Set ((uint32_t)0x00000010)
#define CR_OPTPG_Reset ((uint32_t)0xFFFFFFEF)
#define CR_OPTER_Set ((uint32_t)0x00000020)
#define CR_OPTER_Reset ((uint32_t)0xFFFFFFDF)
#define CR_STRT_Set ((uint32_t)0x00000040)
#define CR_LOCK_Set ((uint32_t)0x00000080)
#define CR_FLOCK_Set ((uint32_t)0x00008000)
#define CR_PAGE_PG ((uint32_t)0x00010000)
#define CR_PAGE_ER ((uint32_t)0x00020000)
#define CR_BER32 ((uint32_t)0x00040000)
#define CR_PG_STRT ((uint32_t)0x00200000)
/* FLASH Status Register bits */
#define SR_BSY ((uint32_t)0x00000001)
#define SR_WR_BSY ((uint32_t)0x00000002)
#define SR_WRPRTERR ((uint32_t)0x00000010)
#define SR_EOP ((uint32_t)0x00000020)
/* FLASH Mask */
#define RDPRT_Mask ((uint32_t)0x00000002)
#define WRP0_Mask ((uint32_t)0x000000FF)
#define WRP1_Mask ((uint32_t)0x0000FF00)
#define WRP2_Mask ((uint32_t)0x00FF0000)
#define WRP3_Mask ((uint32_t)0xFF000000)
#define OB_USER_BFB2 ((uint16_t)0x0008)
/* FLASH Keys */
#define RDP_Key ((uint16_t)0x00A5)
#define FLASH_KEY1 ((uint32_t)0x45670123)
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
/* FLASH BANK address */
#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
/* Delay definition */
#define EraseTimeout ((uint32_t)0x000B0000)
#define ProgramTimeout ((uint32_t)0x00005000)
/* Flash Program Valid Address */
#define ValidAddrStart (FLASH_BASE)
#define ValidAddrEnd (FLASH_BASE + 0x78000)
/* FLASH Size */
#define Size_256B 0x100
#define Size_4KB 0x1000
#define Size_32KB 0x8000
/*********************************************************************
* @fn FLASH_Unlock
*
* @brief Unlocks the FLASH Program Erase Controller.
*
* @return none
*/
void FLASH_Unlock(void)
{
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
}
/*********************************************************************
* @fn FLASH_UnlockBank1
*
* @brief Unlocks the FLASH Bank1 Program Erase Controller.
* equivalent to FLASH_Unlock function.
*
* @return none
*/
void FLASH_UnlockBank1(void)
{
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
}
/*********************************************************************
* @fn FLASH_Lock
*
* @brief Locks the FLASH Program Erase Controller.
*
* @return none
*/
void FLASH_Lock(void)
{
FLASH->CTLR |= CR_LOCK_Set;
}
/*********************************************************************
* @fn FLASH_LockBank1
*
* @brief Locks the FLASH Bank1 Program Erase Controller.
*
* @return none
*/
void FLASH_LockBank1(void)
{
FLASH->CTLR |= CR_LOCK_Set;
}
/*********************************************************************
* @fn FLASH_ErasePage
*
* @brief Erases a specified FLASH page(page size 4KB).
*
* @param Page_Address - The page address to be erased.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PER_Set;
FLASH->ADDR = Page_Address;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
FLASH->CTLR &= CR_PER_Reset;
}
return status;
}
/*********************************************************************
* @fn FLASH_EraseAllPages
*
* @brief Erases all FLASH pages.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EraseAllPages(void)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_MER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
FLASH->CTLR &= CR_MER_Reset;
}
return status;
}
/*********************************************************************
* @fn FLASH_EraseAllBank1Pages
*
* @brief Erases all Bank1 FLASH pages.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EraseAllBank1Pages(void)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastBank1Operation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_MER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastBank1Operation(EraseTimeout);
FLASH->CTLR &= CR_MER_Reset;
}
return status;
}
/*********************************************************************
* @fn FLASH_EraseOptionBytes
*
* @brief Erases the FLASH option bytes.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EraseOptionBytes(void)
{
uint16_t rdptmp = RDP_Key;
uint32_t Address = 0x1FFFF800;
__IO uint8_t i;
FLASH_Status status = FLASH_COMPLETE;
if(FLASH_GetReadOutProtectionStatus() != RESET)
{
rdptmp = 0x00;
}
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR &= CR_OPTER_Reset;
FLASH->CTLR |= CR_OPTPG_Set;
OB->RDPR = (uint16_t)rdptmp;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
else
{
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
/* Write 0xFF */
FLASH->CTLR |= CR_OPTPG_Set;
for(i = 0; i < 8; i++)
{
*(uint16_t *)(Address + 2 * i) = 0x00FF;
while(FLASH->STATR & SR_BSY)
;
}
FLASH->CTLR &= ~CR_OPTPG_Set;
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramWord
*
* @brief Programs a word at a specified address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
__IO uint32_t tmp = 0;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PG_Set;
*(__IO uint16_t *)Address = (uint16_t)Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
tmp = Address + 2;
*(__IO uint16_t *)tmp = Data >> 16;
status = FLASH_WaitForLastOperation(ProgramTimeout);
FLASH->CTLR &= CR_PG_Reset;
}
else
{
FLASH->CTLR &= CR_PG_Reset;
}
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramHalfWord
*
* @brief Programs a half word at a specified address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PG_Set;
*(__IO uint16_t *)Address = Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
FLASH->CTLR &= CR_PG_Reset;
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramOptionByteData
*
* @brief Programs a half word at a specified Option Byte Data address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
uint32_t Addr = 0x1FFFF800;
__IO uint8_t i;
uint16_t pbuf[8];
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
/* Read optionbytes */
for(i = 0; i < 8; i++)
{
pbuf[i] = *(uint16_t *)(Addr + 2 * i);
}
/* Erase optionbytes */
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_OPTER_Set;
/* Write optionbytes */
pbuf[((Address - 0x1FFFF800) / 2)] = ((((uint16_t) ~(Data)) << 8) | ((uint16_t)Data));
FLASH->CTLR |= CR_OPTPG_Set;
for(i = 0; i < 8; i++)
{
*(uint16_t *)(Addr + 2 * i) = pbuf[i];
while(FLASH->STATR & SR_BSY)
;
}
FLASH->CTLR &= ~CR_OPTPG_Set;
}
return status;
}
/*********************************************************************
* @fn FLASH_EnableWriteProtection
*
* @brief Write protects the desired sectors
*
* @param FLASH_Sectors - specifies the address of the pages to be write protected.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Sectors)
{
uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF;
FLASH_Status status = FLASH_COMPLETE;
uint32_t Addr = 0x1FFFF800;
__IO uint8_t i;
uint16_t pbuf[8];
FLASH_Sectors = (uint32_t)(~FLASH_Sectors);
WRP0_Data = (uint16_t)(FLASH_Sectors & WRP0_Mask);
WRP1_Data = (uint16_t)((FLASH_Sectors & WRP1_Mask) >> 8);
WRP2_Data = (uint16_t)((FLASH_Sectors & WRP2_Mask) >> 16);
WRP3_Data = (uint16_t)((FLASH_Sectors & WRP3_Mask) >> 24);
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
/* Read optionbytes */
for(i = 0; i < 8; i++)
{
pbuf[i] = *(uint16_t *)(Addr + 2 * i);
}
/* Erase optionbytes */
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_OPTER_Set;
/* Write optionbytes */
pbuf[4] = WRP0_Data;
pbuf[5] = WRP1_Data;
pbuf[6] = WRP2_Data;
pbuf[7] = WRP3_Data;
FLASH->CTLR |= CR_OPTPG_Set;
for(i = 0; i < 8; i++)
{
*(uint16_t *)(Addr + 2 * i) = pbuf[i];
while(FLASH->STATR & SR_BSY)
;
}
FLASH->CTLR &= ~CR_OPTPG_Set;
}
return status;
}
/*********************************************************************
* @fn FLASH_ReadOutProtection
*
* @brief Enables or disables the read out protection.
*
* @param Newstate - new state of the ReadOut Protection(ENABLE or DISABLE).
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
{
FLASH_Status status = FLASH_COMPLETE;
uint32_t Addr = 0x1FFFF800;
__IO uint8_t i;
uint16_t pbuf[8];
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
/* Read optionbytes */
for(i = 0; i < 8; i++)
{
pbuf[i] = *(uint16_t *)(Addr + 2 * i);
}
/* Erase optionbytes */
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_OPTER_Set;
/* Write optionbytes */
if(NewState == DISABLE)
pbuf[0] = 0x5AA5;
else
pbuf[0] = 0x00FF;
FLASH->CTLR |= CR_OPTPG_Set;
for(i = 0; i < 8; i++)
{
*(uint16_t *)(Addr + 2 * i) = pbuf[i];
while(FLASH->STATR & SR_BSY)
;
}
FLASH->CTLR &= ~CR_OPTPG_Set;
}
return status;
}
/*********************************************************************
* @fn FLASH_UserOptionByteConfig
*
* @brief Programs the FLASH User Option Byte - IWDG_SW / RST_STOP / RST_STDBY.
*
* @param OB_IWDG - Selects the IWDG mode
* OB_IWDG_SW - Software IWDG selected
* OB_IWDG_HW - Hardware IWDG selected
* OB_STOP - Reset event when entering STOP mode.
* OB_STOP_NoRST - No reset generated when entering in STOP
* OB_STOP_RST - Reset generated when entering in STOP
* OB_STDBY - Reset event when entering Standby mode.
* OB_STDBY_NoRST - No reset generated when entering in STANDBY
* OB_STDBY_RST - Reset generated when entering in STANDBY
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY)
{
FLASH_Status status = FLASH_COMPLETE;
uint32_t Addr = 0x1FFFF800;
__IO uint8_t i;
uint16_t pbuf[8];
uint16_t temp;
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
/* Read optionbytes */
for(i = 0; i < 8; i++)
{
pbuf[i] = *(uint16_t *)(Addr + 2 * i);
}
temp=pbuf[1]&(~0x7);
/* Erase optionbytes */
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_OPTER_Set;
/* Write optionbytes */
pbuf[1] = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)temp)));
FLASH->CTLR |= CR_OPTPG_Set;
for(i = 0; i < 8; i++)
{
*(uint16_t *)(Addr + 2 * i) = pbuf[i];
while(FLASH->STATR & SR_BSY)
;
}
FLASH->CTLR &= ~CR_OPTPG_Set;
}
return status;
}
/*********************************************************************
* @fn FLASH_GetUserOptionByte
*
* @brief Returns the FLASH User Option Bytes values.
*
* @return The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
* and RST_STDBY(Bit2).
*/
uint32_t FLASH_GetUserOptionByte(void)
{
return (uint32_t)(FLASH->OBR >> 2);
}
/*********************************************************************
* @fn FLASH_GetWriteProtectionOptionByte
*
* @brief Returns the FLASH Write Protection Option Bytes Register value.
*
* @return The FLASH Write Protection Option Bytes Register value.
*/
uint32_t FLASH_GetWriteProtectionOptionByte(void)
{
return (uint32_t)(FLASH->WPR);
}
/*********************************************************************
* @fn FLASH_GetReadOutProtectionStatus
*
* @brief Checks whether the FLASH Read Out Protection Status is set or not.
*
* @return FLASH ReadOut Protection Status(SET or RESET)
*/
FlagStatus FLASH_GetReadOutProtectionStatus(void)
{
FlagStatus readoutstatus = RESET;
if((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
{
readoutstatus = SET;
}
else
{
readoutstatus = RESET;
}
return readoutstatus;
}
/*********************************************************************
* @fn FLASH_ITConfig
*
* @brief Enables or disables the specified FLASH interrupts.
*
* @param FLASH_IT - specifies the FLASH interrupt sources to be enabled or disabled.
* FLASH_IT_ERROR - FLASH Error Interrupt
* FLASH_IT_EOP - FLASH end of operation Interrupt
* NewState - new state of the specified Flash interrupts(ENABLE or DISABLE).
*
* @return FLASH Prefetch Buffer Status (SET or RESET).
*/
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
{
if(NewState != DISABLE)
{
FLASH->CTLR |= FLASH_IT;
}
else
{
FLASH->CTLR &= ~(uint32_t)FLASH_IT;
}
}
/*********************************************************************
* @fn FLASH_GetFlagStatus
*
* @brief Checks whether the specified FLASH flag is set or not.
*
* @param FLASH_FLAG - specifies the FLASH flag to check.
* FLASH_FLAG_BSY - FLASH Busy flag
* FLASH_FLAG_WRPRTERR - FLASH Write protected error flag
* FLASH_FLAG_EOP - FLASH End of Operation flag
* FLASH_FLAG_OPTERR - FLASH Option Byte error flag
*
* @return The new state of FLASH_FLAG (SET or RESET).
*/
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
{
FlagStatus bitstatus = RESET;
if(FLASH_FLAG == FLASH_FLAG_OPTERR)
{
if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
else
{
if((FLASH->STATR & FLASH_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
return bitstatus;
}
/*********************************************************************
* @fn FLASH_ClearFlag
*
* @brief Clears the FLASH's pending flags.
*
* @param FLASH_FLAG - specifies the FLASH flags to clear.
* FLASH_FLAG_WRPRTERR - FLASH Write protected error flag
* FLASH_FLAG_EOP - FLASH End of Operation flag
*
* @return none
*/
void FLASH_ClearFlag(uint32_t FLASH_FLAG)
{
FLASH->STATR = FLASH_FLAG;
}
/*********************************************************************
* @fn FLASH_GetStatus
*
* @brief Returns the FLASH Status.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_GetStatus(void)
{
FLASH_Status flashstatus = FLASH_COMPLETE;
if((FLASH->STATR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
{
flashstatus = FLASH_BUSY;
}
else
{
if((FLASH->STATR & FLASH_FLAG_WRPRTERR) != 0)
{
flashstatus = FLASH_ERROR_WRP;
}
else
{
flashstatus = FLASH_COMPLETE;
}
}
return flashstatus;
}
/*********************************************************************
* @fn FLASH_GetBank1Status
*
* @brief Returns the FLASH Bank1 Status.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_GetBank1Status(void)
{
FLASH_Status flashstatus = FLASH_COMPLETE;
if((FLASH->STATR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
{
flashstatus = FLASH_BUSY;
}
else
{
if((FLASH->STATR & FLASH_FLAG_BANK1_WRPRTERR) != 0)
{
flashstatus = FLASH_ERROR_WRP;
}
else
{
flashstatus = FLASH_COMPLETE;
}
}
return flashstatus;
}
/*********************************************************************
* @fn FLASH_WaitForLastOperation
*
* @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
*
* @param Timeout - FLASH programming Timeout
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_GetBank1Status();
while((status == FLASH_BUSY) && (Timeout != 0x00))
{
status = FLASH_GetBank1Status();
Timeout--;
}
if(Timeout == 0x00)
{
status = FLASH_TIMEOUT;
}
return status;
}
/*********************************************************************
* @fn FLASH_WaitForLastBank1Operation
*
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
*
* @param Timeout - FLASH programming Timeout
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_GetBank1Status();
while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
{
status = FLASH_GetBank1Status();
Timeout--;
}
if(Timeout == 0x00)
{
status = FLASH_TIMEOUT;
}
return status;
}
/*********************************************************************
* @fn FLASH_Unlock_Fast
*
* @brief Unlocks the Fast Program Erase Mode.
*
* @return none
*/
void FLASH_Unlock_Fast(void)
{
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
/* Fast program mode unlock */
FLASH->MODEKEYR = FLASH_KEY1;
FLASH->MODEKEYR = FLASH_KEY2;
}
/*********************************************************************
* @fn FLASH_Lock_Fast
*
* @brief Locks the Fast Program Erase Mode.
*
* @return none
*/
void FLASH_Lock_Fast(void)
{
FLASH->CTLR |= CR_FLOCK_Set;
}
/*********************************************************************
* @fn FLASH_ErasePage_Fast
*
* @brief Erases a specified FLASH page (1page = 256Byte).
*
* @param Page_Address - The page address to be erased.
*
* @return none
*/
void FLASH_ErasePage_Fast(uint32_t Page_Address)
{
Page_Address &= 0xFFFFFF00;
FLASH->CTLR |= CR_PAGE_ER;
FLASH->ADDR = Page_Address;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_ER;
}
/*********************************************************************
* @fn FLASH_EraseBlock_32K_Fast
*
* @brief Erases a specified FLASH Block (1Block = 32KByte).
*
* @param Block_Address - The block address to be erased.
*
* @return none
*/
void FLASH_EraseBlock_32K_Fast(uint32_t Block_Address)
{
Block_Address &= 0xFFFF8000;
FLASH->CTLR |= CR_BER32;
FLASH->ADDR = Block_Address;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_BER32;
}
/*********************************************************************
* @fn FLASH_ProgramPage_Fast
*
* @brief Program a specified FLASH page (1page = 256Byte).
*
* @param Page_Address - The page address to be programed.
*
* @return none
*/
void FLASH_ProgramPage_Fast(uint32_t Page_Address, uint32_t *pbuf)
{
uint8_t size = 64;
Page_Address &= 0xFFFFFF00;
FLASH->CTLR |= CR_PAGE_PG;
while(FLASH->STATR & SR_BSY)
;
while(FLASH->STATR & SR_WR_BSY)
;
while(size)
{
*(uint32_t *)Page_Address = *(uint32_t *)pbuf;
Page_Address += 4;
pbuf += 1;
size -= 1;
while(FLASH->STATR & SR_WR_BSY)
;
}
FLASH->CTLR |= CR_PG_STRT;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_PG;
}
/*********************************************************************
* @fn FLASH_Access_Clock_Cfg
*
* @brief Config FLASH Access Clock(Need to unlock )
*
* @param FLASH_Access_CLK -
* FLASH_Access_SYSTEM_HALF - System clock/2
* FLASH_Access_SYSTEM - System clock
*
* @return none
*/
void FLASH_Access_Clock_Cfg(uint32_t FLASH_Access_CLK)
{
FLASH->CTLR &= ~(1 << 25);
FLASH->CTLR |= FLASH_Access_CLK;
}
/*********************************************************************
* @fn FLASH_Enhance_Mode
*
* @brief Read FLASH Enhance Mode
*
* @param Newstate - new state of the ReadOut Protection(ENABLE or DISABLE).
*
* @return none
*/
void FLASH_Enhance_Mode(FunctionalState NewState)
{
if(NewState)
{
FLASH->CTLR |= (1 << 24);
}
else
{
FLASH->CTLR &= ~(1 << 24);
FLASH->CTLR |= (1 << 22);
}
}
/*********************************************************************
* @fn ROM_ERASE
*
* @brief Select erases a specified FLASH .
*
* @param StartAddr - Erases Flash start address(StartAddr%256 == 0).
* Cnt - Erases count.
* Erase_Size - Erases size select.The returned value can be:
* Size_32KB, Size_4KB, Size_256B.
*
* @return none.
*/
static void ROM_ERASE(uint32_t StartAddr, uint32_t Cnt, uint32_t Erase_Size)
{
do{
if(Erase_Size == Size_32KB)
{
FLASH->CTLR |= CR_BER32;
}
else if(Erase_Size == Size_4KB)
{
FLASH->CTLR |= CR_PER_Set;
}
else if(Erase_Size == Size_256B)
{
FLASH->CTLR |= CR_PAGE_ER;
}
FLASH->ADDR = StartAddr;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
if(Erase_Size == Size_32KB)
{
FLASH->CTLR &= ~CR_BER32;
StartAddr += Size_32KB;
}
else if(Erase_Size == Size_4KB)
{
FLASH->CTLR &= ~CR_PER_Set;
StartAddr += Size_4KB;
}
else if(Erase_Size == Size_256B)
{
FLASH->CTLR &= ~CR_PAGE_ER;
StartAddr += Size_256B;
}
}while(--Cnt);
}
/*********************************************************************
* @fn FLASH_ROM_ERASE
*
* @brief Erases a specified FLASH .
*
* @param StartAddr - Erases Flash start address(StartAddr%256 == 0).
* Length - Erases Flash start Length(Length%256 == 0).
*
* @return FLASH Status - The returned value can be: FLASH_ADR_RANGE_ERROR,
* FLASH_ALIGN_ERROR, FLASH_OP_RANGE_ERROR or FLASH_COMPLETE.
*/
FLASH_Status FLASH_ROM_ERASE(uint32_t StartAddr, uint32_t Length)
{
uint32_t Addr0 = 0, Addr1 = 0, Length0 = 0, Length1 = 0;
FLASH_Status status = FLASH_COMPLETE;
if((StartAddr < ValidAddrStart) || (StartAddr >= ValidAddrEnd))
{
return FLASH_ADR_RANGE_ERROR;
}
if((StartAddr + Length) > ValidAddrEnd)
{
return FLASH_OP_RANGE_ERROR;
}
if((StartAddr & (Size_256B-1)) || (Length & (Size_256B-1)) || (Length == 0))
{
return FLASH_ALIGN_ERROR;
}
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
/* Fast mode unlock */
FLASH->MODEKEYR = FLASH_KEY1;
FLASH->MODEKEYR = FLASH_KEY2;
Addr0 = StartAddr;
if(Length >= Size_32KB)
{
Length0 = Size_32KB - (Addr0 & (Size_32KB - 1));
Addr1 = StartAddr + Length0;
Length1 = Length - Length0;
}
else if(Length >= Size_4KB)
{
Length0 = Size_4KB - (Addr0 & (Size_4KB - 1));
Addr1 = StartAddr + Length0;
Length1 = Length - Length0;
}
else if(Length >= Size_256B)
{
Length0 = Length;
}
/* Erase 32KB */
if(Length0 >= Size_32KB)//front
{
Length = Length0;
if(Addr0 & (Size_32KB - 1))
{
Length0 = Size_32KB - (Addr0 & (Size_32KB - 1));
}
else
{
Length0 = 0;
}
ROM_ERASE((Addr0 + Length0), ((Length - Length0) >> 15), Size_32KB);
}
if(Length1 >= Size_32KB)//back
{
StartAddr = Addr1;
Length = Length1;
if((Addr1 + Length1) & (Size_32KB - 1))
{
Addr1 = ((StartAddr + Length1) & (~(Size_32KB - 1)));
Length1 = (StartAddr + Length1) & (Size_32KB - 1);
}
else
{
Length1 = 0;
}
ROM_ERASE(StartAddr, ((Length - Length1) >> 15), Size_32KB);
}
/* Erase 4KB */
if(Length0 >= Size_4KB) //front
{
Length = Length0;
if(Addr0 & (Size_4KB - 1))
{
Length0 = Size_4KB - (Addr0 & (Size_4KB - 1));
}
else
{
Length0 = 0;
}
ROM_ERASE((Addr0 + Length0), ((Length - Length0) >> 12), Size_4KB);
}
if(Length1 >= Size_4KB) //back
{
StartAddr = Addr1;
Length = Length1;
if((Addr1 + Length1) & (Size_4KB - 1))
{
Addr1 = ((StartAddr + Length1) & (~(Size_4KB - 1)));
Length1 = (StartAddr + Length1) & (Size_4KB - 1);
}
else
{
Length1 = 0;
}
ROM_ERASE(StartAddr, ((Length - Length1) >> 12), Size_4KB);
}
/* Erase 256B */
if(Length0)//front
{
ROM_ERASE(Addr0, (Length0 >> 8), Size_256B);
}
if(Length1)//back
{
ROM_ERASE(Addr1, (Length1 >> 8), Size_256B);
}
FLASH->CTLR |= CR_FLOCK_Set;
FLASH->CTLR |= CR_LOCK_Set;
return status;
}
/*********************************************************************
* @fn FLASH_ROM_WRITE
*
* @brief Writes a specified FLASH .
*
* @param StartAddr - Writes Flash start address(StartAddr%256 == 0).
* Length - Writes Flash start Length(Length%256 == 0).
* pbuf - Writes Flash value buffer.
*
* @return FLASH Status - The returned value can be: FLASH_ADR_RANGE_ERROR,
* FLASH_ALIGN_ERROR, FLASH_OP_RANGE_ERROR or FLASH_COMPLETE.
*/
FLASH_Status FLASH_ROM_WRITE(uint32_t StartAddr, uint32_t *pbuf, uint32_t Length)
{
uint32_t i;
uint8_t size;
FLASH_Status status = FLASH_COMPLETE;
if((StartAddr < ValidAddrStart) || (StartAddr >= ValidAddrEnd))
{
return FLASH_ADR_RANGE_ERROR;
}
if((StartAddr + Length) > ValidAddrEnd)
{
return FLASH_OP_RANGE_ERROR;
}
if((StartAddr & (Size_256B-1)) || (Length & (Size_256B-1)) || (Length == 0))
{
return FLASH_ALIGN_ERROR;
}
i = Length >> 8;
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
/* Fast program mode unlock */
FLASH->MODEKEYR = FLASH_KEY1;
FLASH->MODEKEYR = FLASH_KEY2;
do{
FLASH->CTLR |= CR_PAGE_PG;
while(FLASH->STATR & SR_BSY)
;
while(FLASH->STATR & SR_WR_BSY)
;
size = 64;
while(size)
{
*(uint32_t *)StartAddr = *(uint32_t *)pbuf;
StartAddr += 4;
pbuf += 1;
size -= 1;
while(FLASH->STATR & SR_WR_BSY)
;
}
FLASH->CTLR |= CR_PG_STRT;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_PG;
}while(--i);
FLASH->CTLR |= CR_FLOCK_Set;
FLASH->CTLR |= CR_LOCK_Set;
return status;
}